LED Canopy Light

Lighting Specifications

A series of LED canopy lights ideally suited for petrol stations, tunnels, garages and parking areas. Seamlessly efficient and durable. The canopy light is available in a multitude of colors using the reputable Bridgleux LED chip set powered by Meanwell drivers. Performing at a minimum of 140lm/w, this canopy light is guaranteed to provide a high quality of light with substantial savings and is virtually maintenance free.

A series of LED canopy lights ideally suited for:

Petrol Stations

Restaurant drive throughs



Cold Rooms




Parking Areas

Designed for easy installation and to serve as a long-term high light output energy saver. The canopy lights are constructed primarily from combination of steel casing and brackets, aluminum heatsinks as well as high impact polycarbonate diffusers. Its durable and rugged design makes it the perfect area lighting solution for a wide array of South African coastal or inland applications. The canopy light is available as both surface mount and recessed.

Custom built to effectively operate in South African conditions on 230V line voltage with a tolerance from 100 ~ 305V AC. 100W and 150W, 200W options are available. Powered by the reassuringly resilient brand of Meanwell electronic drivers. The canopy luminaire and control set offering unmatched reliability with reduced harmonic distortion, no visible flicker or emi interference. Built in 4KV Surge Protection.

Quality Assurance

Storage and Operation

Photometric Specifications

Total Luminous flux may slightly vary >5% on correlated color temperature and light distribution beam angle. IES files are available on specific models

LEDs are available in standard 70Ra & 80Ra.

Spectral Data

Light Distribution options

Electro-Mechanical Data


Over current - Constant current limiting, recovers automatically after fault condition is removed.

Short circuit - Hiccup mode, recovers automatically after fault condition is removed.

Over Voltage - Shut down and latch off o/p voltage, re-power on to recover.

Meanwell HLG Driver. Vibration: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes.


UL1012, CAN/CSA-C22.2 No. 107.1-01, UL8750(type”HL”), CSA C22.2 No. 250.0-08; EN/AS/NZS 61347-1,EN/AS/NZS 61347-2-13 independent (except for HLG-240H C type); UL60950-1(except for AB type),UL8750,TUV EN60950-1;GB19510.1GB19510.14; IP65 or IP67;J61347-1,J61347-2-13(except for B,AB and D-type),BIS IS15885( for 48V only),EAC TP TC 004,KC61347-1,KC61347-2-13(except for AB,C,D-type) approved Meanwell HLG Driver range